Description
Aquipond Boost & Clean is an active-oxygen regenerator for ponds, natural swimming pools and regeneration zones. Within a few hours it lifts biofilm, sludge and string algae from the bottom, stones and walls. The deposits rise to the surface: you remove them, and the oxygen-enriched water gets the bacteria that digest the rest back to work.
How Boost & Clean works
Leaves, pollen, leftover food, droppings and dead algae settle on the bottom, on stones and in low-flow areas. They form sludge and biofilm, consume oxygen and put strain on filtration. Boost & Clean works in two stages:
- Immediate cleaning. Once spread, it releases active oxygen on contact with organic matter. This comes loose and rises to the surface, where the net, skimmer and filter can remove it.
- Biological restart. The extra oxygen creates favourable conditions for the beneficial bacteria already present, which then digest the remaining residue more efficiently.
Illustrative diagram. Results depend on the amount of accumulated waste and on actually removing the material that rises.
Natural swimming pools: getting rid of biofilm
Biofilm is a slippery film of bacteria, organic matter and micro-algae that clings to the walls, steps, liner and pebbles of the swimming zone. It makes surfaces slippery, traps deposits and gives algae a foothold. Boost & Clean releases its active oxygen on contact with this film: it comes loose, rises and can be removed with the skimmer, a net or a pond vacuum. Surfaces are clean again, with no chlorine and no heavy scrubbing.
Regeneration zones: lifting string algae
In a planted regeneration zone, a lava filter or a planted filter, you simply cannot brush between the roots and the gravel. Yet that is exactly where organic matter builds up and string algae settle in. Boost & Clean lifts the filaments and the deposits that feed them: they float to the surface, where you just need to scoop them out. By taking this organic load out of the system, you deprive the algae of what fuels their regrowth.
The benefits for your pond
- Fast supply of active oxygen, especially in low-flow areas.
- Lifts accumulated organic matter: sludge, deposits, biofilm.
- Cleans the walls and steps of natural pools by loosening slippery biofilm.
- Clears regeneration zones and planted filters of string algae and deposits, without dismantling them.
- Visible results within hours: the waste rises during treatment.
- Takes pressure off filtration by letting you remove part of the waste.
- Prepares the ground for beneficial bacteria, such as Aquipond BactoSwim in natural pools or Bacto Maintenance in ponds.
- Neutralises residual purple colouring after certain potassium permanganate treatments.
Directions for use
Calculate the pond volume accurately and check pH, GH and KH. Make sure filtration and aeration are running, then spread the dose evenly over the surface without dissolving it first. In a regeneration zone, focus on the most loaded areas. Over the following hours, regularly pass a fine-mesh net, keep the skimmer running and clean the filter if it clogs: waste taken out of the pond can no longer rot on the bottom.
What dose for my pond?
Dosage: 25 g per m³ of water (25 g per 1,000 litres). With a heavy organic load, repeat the treatment, leaving at least 15 days between applications.
| Pond volume | Dose per treatment |
|---|---|
| 5 m³ (5,000 L) | 125 g |
| 10 m³ (10,000 L) | 250 g |
| 20 m³ (20,000 L) | 500 g |
| 50 m³ (50,000 L) | 1.25 kg |
| 100 m³ (100,000 L) | 2.5 kg |
Choose your size (one treatment): 1 kg for 40 m³, 2.5 kg for 100 m³, 5 kg for 200 m³, 10 kg for 400 m³.
For lasting results: Boost & Clean, then bacteria
Boost & Clean cleans; bacteria maintain. Once the deposits are removed, seed with Aquipond BactoSwim in a natural pool or Bacto Maintenance in a pond, following their own instructions (including switching off the UV lamp if required). The bacteria digest organic matter as it appears and keep biofilm and sludge from returning.
Good to know
- Use at the spring restart, after leaf fall, when the bottom builds up, when stones and walls turn slippery or when the filter clogs quickly.
- Especially useful in regeneration zones, lava filters and planted filters, which are hard to clean mechanically.
- Light foam, temporarily cloudy water or floating particles may appear: a sign that material is being lifted into suspension. This is normal and temporary.
- The more waste you remove during treatment, the better the result.
Precautions: keep water circulation and oxygenation good during treatment. Follow the protocols and dosages of any other treatments used in the pond.
Secure payment
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Talk to an Aquipond expert
Every pond is different. Tell us about yours and we will tell you what to do, free of charge and with no obligation.
Or message us in the chat, at the bottom left of the screen.
Other options to compare
Pick up where you left off
The products you viewed · Free delivery from €149









